In stock - Available for Immediate Despatch
$16.54
In stock - Available for Immediate Despatch
Genuine spare part
Stock No: 1119380BS
If the brushbar on your vacuum cleaner has stopped spinning it could be a problem with the belt. If the belt has snapped or worn out then this is the ideal replacement. Learn more about vacuum belts below:
What does the vacuum belt do?
The vacuum belt is a key component of an upright vacuum cleaner. Its primary function is to turn the agitator brush bar, which is used to beat dirt and dust out of the carpets. Vacuum belts are made of rubber and they are stretched between the motor pulley, which powers the belt, and the brush bar/agitator.
Is a faulty belt causing the problem?
The following faults typically indicate a problem with the vacuum belt:
*Remember that a snapped or loose vacuum belt is the most likely cause, but this may not be the only fault that can cause these issues to arise.
When should you replace a vacuum belt?
Vacuum belts need to be replaced as soon as they become damaged. They are designed to snap if the brush roll becomes blocked in order to protect the motor. To ensure that your vacuum cleaner maintains effective performance it is usually suggested that you replace the belt around every 4 - 6 months as they can easily become stretched. It is also recommended that you keep a spare vacuum belt in the cupboard, so you are prepared.
You can check for signs of a damaged belt by turning on the vacuum cleaner and laying it on its side. Simply look underneath the vacuum cleaner to identify if the brush bar is spinning. If the brush bar doesn't move then the belt needs to be replaced. Also when you remove a suspected worn belt it may have become mis-shaped or have visible signs of wear such as burn marks.
Please check model fit list to ensure this part is correct for your model.
BuySpares Approved part
Type: NVM-1CH Includes 5 x Synthetic dust bags 99.9% Filtration - Extraordinary performance with 99.9% efficiency Eco Friendly - Maximum levels of... More information
In stock - Available for Immediate Despatch
Save 25% if you buy 2 or more - only $6.06
$8.07
Box of 5Save 25% if you buy 2 or more - only $6.06
BuySpares Approved part
Type: NVM-1CH Includes 10 x Synthetic dust bags 99.9% Filtration - Extraordinary performance with 99.9% efficiency Eco Friendly - Maximum levels of... More information
In stock - Available for Immediate Despatch
Save 25% if you buy 2 or more - only $8.27
$11.02
Box of 10Save 25% if you buy 2 or more - only $8.27
BuySpares Approved part
Type: NVM1B / NVM1C / NVM1C2 Includes 10x Compatible Dust Bags Cardboard Collar Replaces original manufacturer codes NVM1B/1C & NVM 1C/2 High filtration... More information
In stock - Available for Immediate Despatch
Save 20% if you buy 2 or more - only $8.31
$10.39
Pack of 10Save 20% if you buy 2 or more - only $8.31
BuySpares Approved part
Type: NVM-15B Width 305 mm Includes 1 x Compatible cloth bag Clogged up filters may be reducing your vacuum's suction. This high quality replacement... More information
In stock - Available for Immediate Despatch
Save 10% if you buy 2 or more - only $10.48
$11.64
Save 10% if you buy 2 or more - only $10.48
BuySpares Approved part
Push fit Diameter: 32mm Width: 305mm Length: 90mm Colour: Black An ideal replacement floor tool which will improve the performance of your vacuum... More information
In stock - Available for Immediate Despatch
$17.98
BuySpares Approved part
2 x 500mm Chrome extension tubes 1 x Bent end hose - with volume control for efficient cleaning of mats, carpets, & upholstery Fits externally to... More information
In stock - Available for Immediate Despatch
$28.07
BuySpares Approved part
Fits externally to 32 mm Vacuum Hoses & Extension Tubes 1 x Round Dusting Brush - soft bristles for effective dusting/cleaning of grooves, without... More information
In stock - Available for Immediate Despatch
$16.54
BuySpares Approved part
Fits externally to 32 mm Vacuum Hoses & Extension Tubes 1 x 280mm Combination floor tool - for carpet and hard floors (hidden set of brushes for use... More information
In stock - Available for Immediate Despatch
$25.99
BuySpares Approved part
Fits externally to 32 mm Vacuum Hoses & Extension Tubes 1 x 280mm Combination floor tool for carpet and hard floors (hidden set of brushes for use... More information
In stock - Available for Immediate Despatch
$27.29
BuySpares Approved part
Length 2.5 m Diameter: 32 (mm) With Slanted Cuff Model specific fitting Get the suction power you require from your vacuum cleaner with this value... More information
In stock - Available for Immediate Despatch
$16.24
BuySpares Approved part
To suit width 32 mm Length 1.8 m Colour: Black This replacement hose is designed to fit Numatic Henry/ Charles/ NV200/ 250/ 300 models and is ideal... More information
In stock - Available for Immediate Despatch
$16.54
BuySpares Approved part
32mm Complete Hose Domestic/Commercial With Slanted Cuff 5m hose length The vacuum cleaner hose is a long cylindrical part which connects to a port... More information
In stock - Available for Immediate Despatch
$30.95
Genuine spare part
Stock No: 1119380BS
We constantly check our prices so you get a good deal!
We aim to provide exceptional customer service
We offer a large range of spare parts and accessories
BuySpares - Buy genuine replacement spares, spare parts and accessories for all your Home and Garden Electrical Appliances
Manufacturers' names and numbers are used for reference purposes only. Prices subject to change. Errors and omissions excepted. © 2024 All rights reserved This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.We use small text files called cookies to give you the best experience on our website and help us show you relevant information.
You can choose whether to manage these or allow them all. View Cookie Policy.
We use small text files called cookies to give you the best experience on our website and help us show you relevant information. You can choose whether to manage these or allow them all.
See our cookies page for more information.